May Manufacturing Island spas Manuel du propriétaire télécharger pdf (Page 41)

The water ow is low – M016

There may not be enough water ow through the heater to carry the heat

away from the heating elements. Heater start up will begin again after

about 1 minute.

Flow-Related Checks

Check for low water level, suction ow restriction (lters) closed valved, or

trapped air.

The water ow has failed* – M017

There is not enough water ow through the heater to carry the heat away

from the heating element and the heater has been disabled. After the ow

problem has been resolved you must press any

button to reset and begin the heater start up.

Flow-Related Checks

Check for low water level, suction ow restriction (lters) closed valved, or

trapped air.

The heater may be dry* – M028

Possible dry heater or not enough water in the heater to start it. The spa

is shut down for 15 minutes. Press any button to reset the heater start-up.

Flow-Related Checks

Check for low water level, suction ow restriction (lters) closed valved, or

trapped air.

The heater is dry* – M027

There is not enough water in the heater to start it. The spa is shut down.

After the problem has been resolved, you must clear the message to re-

start the heater.

Flow-Related Checks

Check for low water level, suction ow restriction (lters) closed valved, or

trapped air.

HEATER-RELATED MESSAGES

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 64 65

Pas de commentaire

May Manufacturing Island spas Manuel du propriétaire Page 41